Arduino starting Kit(Compatible with Ardublock Mixly)

Arduino starting Kit(Compatible with Ardublock Mixly)
Arduino starting Kit(Compatible with Ardublock Mixly) Arduino starting Kit(Compatible with Ardublock Mixly) Arduino starting Kit(Compatible with Ardublock Mixly)
Product Code: RLKIT303AR
Availability: 1000
Price: $51.80

5 or more $51.80
10 or more $49.20
20 or more $44.03
50 or more $41.44
100 or more $36.26
Qty:     - OR -   Add to Wish List
Add to Compare

Description:

Welcome to the world of open source hardware! Rblock Arduino Starter kit could bring Arduino beginners and makers into the world of electronic interaction, it is an simple and plug-play electronics tool kit. The kit is starting with simple projects likes LED and buzzer, then expand to more complex projects, with the purpose of teaching starter about basic electronics theory and how to use Arduino. You can easily use it to build your owm Arduino project or robot.
The microcontroller of the Rblock Starter kit is IRDA board, which includes 2 way DC motor drives, standard 3 Pin-out designed (G-V-S) and based on Arduino UNO. So the sensors could be connected directly onto the IRDA without jumper wires or bread board. Sensors in the starter kit belongs to Ruilongmaker's Rblock. Rblock is built highly standard, not only all of interfaces are strong and stable through the use of good quality XH2.54, But also the types of sensors clearly identified by the logo printed on the PCB board. You can build your project as easy as building blocks with the Rblock starter kit, enjoy yourself!

Microcontroller Specification:

  • Microcontroller: ATmega328P
  • Bootloader: Arduino UNO
  • USB serial interface chip: CH340
  • DC supply : USB Powered or External 7V-12V
  • USB interface: Micro
  • Digital I/O: 8(D2\D3\D8\D9\D10\D11\D12\D13)
  • The PWM channels: 4(D3\D9\D10\D11)
  • Analog channels: 8(A0\A1\A2\A3\A4\A5\A6\A7)
  • The I/O output: 40 mA
  • Flash: 32 KB (ATmega328P) (PS:4K is used in the bootloader)0
  • SRAM: 2.5 KB (ATmega328P)
  • EEPROM: 1 KB (ATmega328P)
  • The clock speed: 16 MHz
  • Working current: 150 MA
  • Interface: Standard 3 Pin-out (G-GND V-VCC S-Signal)  (PS:Yellow means Analogy, Blue means Digital)
  • Motor Control Pin: D4 (Direction)/D5(Speed) control motor AO1/AO2 
  •                                D7 (Direction)/D6(Speed) control motor BO1/BO2
  • The infrared receiving sensor: D12 (default)
  • Motor driver: Two way Motor driver
  • Motor driver maximum current: less than 1000ma
  • Module weight: 20.9 g​

Packing list:

  • 1pcsx  IRDA Robot Controller
  • 1pcsx  USB Cable
  • 1pcsx  Infrared remote control
  • 1pcsx  Lamp Block(Red)
  • 1pcsx  Lamp Block(Blue)
  • 1pcsx  Lamp Block(Yellow)
  • 1pcsx  Lamp Block(Green)
  • 1pcsx  Buzzer Block
  • 2pcsx  Button Block
  • 1pcsx  Knob Sensor
  • 1pcsx  Temperature Sensor
  • 1pcsx  HC-SR04 ultrasonic sensors
  • 1pcsx  Sound Sensor
  • 1pcsx  180°9g Servo
  • 2pcsx  TT Motor
  • 1pcsx  5×AA Battery Holder
  • 1pcsx  I2C 1602 Displayer
  • 1pcsx  ST188 Obstacle Sensor

 

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: